|
|
Modbus TCP interface
Krotký, Pavel ; Bohrn, Marek (referee) ; Pavlík, Michal (advisor)
Main puropose of this thesis is to design and develop Ethernet to serial interface converter. Ethernet and serial line protocols are briefly described. Appropriate microprocessor and hardware for realisation of each physical layars were choosen. Convertor uses Texas Instrument's TI-RTOS operating system. Convertor's purpose is to pass on communication between physical layers and also fulfill webserver role with configuration possibilities.
|
|
|
Software Defined Home Automation
Stupka, Dominik ; Brejl,, Milan (referee) ; Povalač, Aleš (advisor)
This thesis is about development and construction of systems for building automation. At the beginning it´s focused on usage of building automation. Short describe used topology of installation and available systems on the market. The second chapter is about designing of hardware’s elements systems. Then it’s describing control unit Raspberry Pi 3, microprocessors for communication and slave modules. For my thesis I am also engaged in interface communication and designing of I/O systems. The third and fourth chapter is describing software equipment’s of the system. The parts of microprocessor firmware and manner of control logic creating and visualization in control unit module are described in details. Last chapter contains the description of construction of testing module and measuring of system parameters.
|
|
|
Complex lighting system
Šipr, Jan ; Hadinec, Michal (referee) ; Friedl, Martin (advisor)
This paper deals with the theoretical basic principles of lighting and regulation. On the basis of theoretical knowledge, there was task to design a lighting system tailored to your needs. Additionally, there is a communication protocols used in lighting technology DMX and ArtNet.
|
|
|
DC motor controler with feedback
Dundáček, Martin ; Štohl, Radek (referee) ; Bradáč, Zdeněk (advisor)
This thesis deals with DC motor control. Main goal was design and realization of DC motor controler module with feedback. The first part dwells on methods for DC motor control and HW design of control module. The second part describes development of software for the module, testing and sums up results.
|
|
|
Graphics indicator
Dvořák, Roman ; Šír, Michal (referee) ; Bradáč, Zdeněk (advisor)
This thesis is consisting of three parts. In first part was conducted market research and then start preparation concept of project Graphic indicator units using in industrial environment. Creating a basis for continued in making electronic schemes and board. Then the board was made in external specialization company. Then all components were installed. After testing all of function the device was ready for implementation firmware. Firmware was consist of few parts – communication with RS232 protocol, RS485, web interface and last parts is communication with touch display.
|
|
|
Using the ADAM industrial sensor system in laboratory measurement
Nos, Pavel ; Chmelař, Milan (referee) ; Rampl, Ivan (advisor)
Main task of the Master Thesis is to introduce into sensor systems used in the field. On Advantech sensor system with use of ADAM 4000 modules is shown decentralized sensor system which comunicates over RS 485 and using master computer. Within Master Thesis was compiled measuring board and were assembled three programs which demonstrate possible use of different types of modules. Main development environment is used ADAMView. Each modules has different number and types of inputs and outputs. Using of sensor system saving measurement time, increasing measurement effeciency, relieves data processing and automatize measurement.
|
|
|
Electronic thermometer and humidity meter
Lapáček, Petr ; Chmelař, Milan (referee) ; Lattenberg, Ivo (advisor)
This master´s thesis deals with the design of measuring station used for the temperature and humidity measurement. There is a theoretical basical description of sensores for temperature and humidity measurement in the first part. Furthermore I deal with a theoretical design of measuring system, especially with types of materials and possibilities of communication between these parts. The main part of thesis is about communication on buses I2C,UART, SPI, RS485. There is a description of function procedure of particular integrated circuit, moduluses which are used in task in the next part of thesis.In the practical part I was engaged in a functional design of autonomous system for the temperature and ralative humidity measurement. Data could be presented by the computer after connection with the station. There is a description of testing the particular circuits and the full description of function particular blocks of system in the task. I have used the program called Eagle for schemes and printed wirings designing. The copy is placed on CD ready for next using. In the last part of thesis is a brief description of program algorithm "Meteostanice", which I have created for data presentation. There is an illustration of measuring results in these last part. The task is completely ready for the realization of autonomous system of weather station with its own memory.
|
|
|
Lighting system for auditorium
Novák, Marek ; Kubásek, Radek (referee) ; Friedl, Martin (advisor)
V této bakalářské práci je uveden návrh a realizace osvětlovacího systému, který svou specifikací překonává možnosti široce rozšířeného protokolu DMX512/RS485. Dále jsou zde popsány omezení tohoto protokolu a také protokolů CAN bus a 100BASE-TX. V závěru je pak navržena síťová topologie, která je vhodná pro řízení daného počtu koncových prvků, spolu se samotným koncovým prvkem (řízeným světlem).
|
|
|
Generic logic analyzer
Tajč, Martin ; Povalač, Karel (referee) ; Kubíček, Michal (advisor)
The aim of the project is to design a generic logic analyzer based on an FPGA. The analyzer should be able to analyze protocols such as I2C, SPI, RS232, RS485 and GPIO. The captured data can be observed using an embedded graphical display or using a PC. The PC can be used to control the analyzer and to save the captured data. The thesis is divided into several parts. First, the basic structure of the analyzer is described including detailed description of its particular components. Later on, the most common protocols that can be decoded using the analyzer are described. Finally, the FPGA subsystem and microcontroller application are presented together with corresponding source codes.
|
|
|
Relay output module for electronic tachograph
Feilhauer, Petr ; Sirka, Martin (referee) ; Zezulka, František (advisor)
This bachelor thesis contains detailed description of function and wiring current Electronic tachograph RE1xx from company UniControls-Tramex. For comparison there is mentioned description of competitor’s products from this branch. The part of this thesis is analysis of measurement actual speed on the train vehicles and analysis of imaging information to staff of vehicle. The base of this finding is making several projects about future way of development of this electronic tachograph. Main programmes of this thesis are design, implementation and verification functions of module relays outputs for Electronic tachograph RE1xx. Practically design must be satisfy with basic technical-law specifications, which refer of this branch for application this device. Thesis contains the description of single parts of scheme, control microcontroller, using of integrated circuits. Further thesis will contain theoretical calculations, design of main software and his implementation to the module. The aim of design and implementation of module relays outputs is evaluation reached outcomes from view technical solutions, functions and price statement of the module.
|
guest ::
